1. Plug-in; 2. Install secondary locks/blind plugs/blind bolts. Assembly process: mainly the assembly of coverings and fixings.

1. Assembly of coverings: winding of tape; installation of various pipes (corrugated pipes/PVC pipes/fiber pipes); installation of sheaths;

2. Installation of positioning parts/brackets.

Subassembly: plug-in

Matching of electrical components: to achieve circuit connection and smooth current flow.

Plug-in: insert the wire with terminals into the hole of the connector to achieve circuit connection and smooth current flow.

How to correctly complete the plug-in:

1. Take the correct kanban line according to the process document.

2. Take the correct connector according to the process document.

3. Insert the kanban line into the correct hole position according to the plug-in visual diagram and process documents without missing any.

4. The three steps of plug-in must be performed to ensure that the plug-in is in place.

Subassembly process----Install secondary lock/blind plug/blind bolt

Heling Industrial Harness is an innovative enterprise focusing on the design and manufacture of connector and harness solutions. The main products are divided into

Harness category: industrial round harness, industrial network cable, industrial bus, servo harness PLC connector harness, DP connector harness

Cable category: industrial bus, industrial network cable,Drag chain